Built on Innovation
®
7
Hidden Features
Feature Where Found Description
PROGRAMMABLE
SENSOR OVERRIDE
Hold – and turn to START TIMES. Sets individual stations to ignore sensor shutdowns. Select stations with
◄ or ►, (use +/–) to change to OFF to ignore sensor.
CYCLE AND SOAK Hold + and turn to RUN TIMES.
Enter Cycle, press PRG to set
Soak.
Sets max time a station can run at once, and minimum time it must wait
before another cycle. Divides run time into segments to prevent runo.
DELAY BETWEEN
STATIONS
Hold – and turn to RUN TIMES. Inserts a delay (seconds or minutes) between stations in a run time, for
slow valves or recharging tanks.
SOLAR SYNC DELAY Hold – and turn to SOLAR SYNC. Allows the user to postpone seasonal adjustment changes from being
made by Solar Sync for up to 99 days. Use the +/– to increase/decrease
the number of days the delay should run.
HIDE PROGRAMS Hold – and turn to WATER DAYS. Use +/– to change from 4 to 1 to hide extra programs. Option 1 will show
only program A, Start Time 1. Option 4 will show all programs and
Start Times.
CLIK-DELAY Hold + and turn to OFF. Set number of days for watering to remain o, aer sensor has been
activated and restored.
TOTAL RUN TIME Turn to RUN TIMES. Press ◄
when station 1 is shown, PRG to
select other programs.
Calculates and displays total of all run times in a program Start Time.
EASY RETRIEVE Hold + and PRG to Save. Hold –
and PRG to Restore.
Saves all program information to restore at a later time.
TOTAL RESET Hold PRG and press RESET
button.
Returns to factory defaults and erases watering schedule and settings.
QUICKCHECK™ +, –, ◄, ► together, then +. Checks all stations for wiring problems.