English
– 5
KEY TO SYMBOLS
Symbols
These symbols are on the machine and in the instructions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
Reverse
Neutral
Fast
Slow
Stop the engine.
Battery
Choke
Fuel
Oil level
Cutting height
Backwards
Forwards
Ignition
Warning: rotating parts. Keep hands and feet
clear
.
Clutch in
Clutch out
Parking brake
Brake
Clutch
Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specified in chapter Technical data and on
label.
Rotary blades Keep hands and feet
away from under the hood when the
engine is running
Never drive across a slope
Never use the machine if persons,
especially children, or animals
, are in the
vicinity
Never carry passengers on the machine
or equipment
Drive very slowly if no cutting unit is fitted
The cutting deck must be fitted at
full speed.
Switch off the engine and take off
the ignition cable before repairs or
maintenance
Noise emission to the environment
www.devicemanuals.eu
Noise emission to the environment
according to the European Community’
www.devicemanuals.eu
according to the European Community’
Directiv
www.devicemanuals.eu
Directiv
e. The machine’s emission is
www.devicemanuals.eu
e. The machine’s emission is
specified in chapter Technical data and on
www.devicemanuals.eu
specified in chapter Technical data and on
label.
www.devicemanuals.eu
label.
Rotary blades Keep hands and feet
www.devicemanuals.eu
Rotary blades Keep hands and feet
www.devicemanuals.euwww.devicemanuals.eu
www.devicemanuals.euwww.devicemanuals.eu
www.devicemanuals.euwww.devicemanuals.eu
www.devicemanuals.euwww.devicemanuals.eu
www.devicemanuals.euwww.devicemanuals.eu
www.devicemanuals.euwww.devicemanuals.eu
To Next Page
Loading...
Need help?
General
