The level of intensity can be adjusted to set how much
over the average height the grass has to be for spiral
cutting to begin.
Low- / Low
sensitivity means that spiral
cutting begins less often.
High / High+
sensitivity means
that spiral cutting begins more often.
In order to minimize the risk for lawn wear in steep
slopes, spiral cutting does not start in slopes steeper
than 15%.
3.21.4 Slope control
In order to reduce lawn wear near boundary wire in
slopes, the product avoids reversing when driving
downhill. When approaching the boundary wire it
therefore either bounces away or makes a U-turn.
Slope
control
is activated by default. Uncheck the box to
deactivate.
3.21.5 General
Set language and time or reset user settings to factory
default.
General Time & date
Language
Country
Reset all user settings
About
3.21.5.1 Time & Date
This function allows you to set current time and date and
required formats.
Time & Date Set time
Set date
Time format
Date format
•
Set time:
Enter the correct time and press OK to
exit.
•
Set date:
Enter correct date and press OK to exit.
•
Time format:
Place the cursor at the required time
format: 12h 24h. Press OK to exit.
•
Date format:
Place the cursor at the required date
format:
YYYY-MM-DD (year-month-day)
MM-DD-YYYY (month-day-year)
DD-MM-YYYY (day-month-year)
Exit by pressing OK.
3.21.5.2 Language
Set language with this function.
To select language: Place the cursor at the required
language and press OK.
3.21.5.3 Country
With this function you can select in what country the
robotic lawnmower will work.
Place the cursor at the required country and press OK.
3.21.5.4 Reset all user settings
This function allows you to reset the robotic lawnmower
to the factory default settings.
The following settings are however not altered:
• Security level
• PIN code
• Loop signal
• Messages
• Date & Time
• Language
• Country
1. Select
Reset all user settings
in the menu and press
OK.
2. Confirm by pressing OK.
3.21.5.5 About
The
About
menu displays information about the robotic
lawnmower's serial number and different software
versions.
3.22 Accessories
Settings for accessories mounted on the mower can be
made in this menu.
ACCESSORIES
Information
Connect@Home
Automower Connect
Mower house
3.22.1 Information
This menu handles accessories mounted on the mower.
Contact Husqvarna customer service for more
information on available accessories.
34 - Installation 840 - 001 -
To Next Page
Need help?
General
