Husqvarna LC 48 User Manual

Spanish – 29
ARRANQUE Y PARADA
Arranque y parada
Arranque
Asegúrese de que el cable está bien colocado en la bujía.
• Tire totalmente de la horquilla del freno de motor contra la
empuñadura superior con la mano izquierda.
• Agarre la empuñadura de arranque y tire despacio de la
cuerda con la mano derecha, hasta sentir una resistencia
(los dientes de arranque engranan), y después tire rápido
y con fuerza. Nunca enrosque el cordón de arranque
alrededor de la mano.
¡NOTA! No extraiga el cordón de arranque al máximo, y no
suelte la empuñadura de arranque si ha extraido todo el
cordón. Ello puede ocasionar averías en la máquina.
Los modelos LC 48VE están equipados con arranque
electrónico, que se usa de la siguiente manera:
• Antes de usar el arranque electrónico por primera vez, es
necesario cargar la batería. Vea las instrucciones del
capítulo 'Mantenimiento'.
• Abata la horquilla del freno de motor contra el manillar.
• Introduzca la llave de encendido y pulse la tecla.
Transmisión LC 48VE, LC 48V, LB 48V
Las máquinas son autopropulsantes con tracción trasera.
Para utilizar la transmisión de las ruedas, tire de la palanca
de embrague hacia usted.
La tracción puede controlarse de forma gradual.
Parada
El motor se para al soltar la horquilla de freno de motor.
En las máquinas con arranque eléctrico, retire la llave.
!
¡ATENCIÓN! Antes de arrancar, observe lo
siguiente:
No ponga en marcha el cortacésped sin que
estén montadas la cuchilla y todas las
cubiertas. De lo contrario, la cuchilla puede
soltarse y causar daños personales.
Antes de arrancar, aparte siempre la
máquina del lugar de repostaje.
Coloque la máquina sobre una base firme.
Controle que el equipo de corte no pueda
atascarse en algún objeto.
Asegúrese de que no haya terceros
desautorizados en la zona de trabajo.

Husqvarna LC 48 Specifications

General

Engine Manufacturer	Briggs & Stratton
Deck Material	Steel
Mulching Capability	Yes
Bagging Capability	Yes
Cutting Height, min-max	1.5 - 4 inches
Cutting Height	1.5 - 4 inches

Summary

Key to Symbols

Explanation of Safety Symbols

Details warning, prohibition, and mandatory safety symbols with their meanings.

Rating Plate Information

Describes the information presented on the machine's rating plate for identification.

Steps Before Using a New Lawn Mower

Pre-Operation Checks and Warnings

Outlines essential pre-operation checks and critical safety warnings for new users.

What is What? (LC Models)

Component Identification for LC 48, LC 48V, LC 48VE

Illustrates and labels the components of the LC 48, LC 48V, and LC 48VE lawn mower models.

What is What? (LB Models)

Component Identification for LB 48, LB 48V

Illustrates and labels the components of the LB 48 and LB 48V lawn mower models.

Safety Instructions - Page 7

Personal Protection and Safety Equipment

Details required personal protective equipment and checks for machine safety features.

Muffler, Cutter, and Engine Brake Safety

Highlights safety precautions for the muffler, cutting equipment, and engine brake.

Safety Instructions - Page 8

General Operational Safety and Ventilation

Covers general safety rules, ventilation, and environmental considerations.

Fuel Handling and Starting Safety

Provides detailed instructions for safe refueling and starting the engine.

Safety Instructions - Page 9

Safe Working Practices and Techniques

Guides on safe operation, mowing techniques, and cutting height adjustments.

Assembly

Handlebar Fitting

Instructions for correctly attaching and securing the lawn mower's handlebar.

Catcher Assembly, Side Ejection, and Mulching

Steps for assembling the catcher, setting up side ejection, and mulching functions.

Fuel Handling

Fuel and Oil Specifications

Details on recommended fuel types, octane ratings, and engine oil.

Safe Refueling Procedures

Step-by-step guide for safe refueling, including fire hazard precautions.

Starting and Stopping

Engine Starting Procedures

Instructions for safely starting the lawn mower engine using starter cord or electric start.

Engine Stopping and Drive Operation

How to stop the engine and operate the self-propelling drive system.

Maintenance - Page 13

Engine Component Maintenance

Covers maintenance for spark plug, muffler, and air filter.

Cutting Attachment and Safety Feature Checks

Details inspection and maintenance for the cutter and safety features.

Maintenance - Page 14

Oil Change and Battery Charging

Procedures for changing engine oil and charging the battery for electric start models.

Cleaning Cutting Cover and Adjusting Clutch Wire

Instructions for cleaning the cutting cover and adjusting the clutch wire.

Maintenance - Page 15

Routine Maintenance Schedules

Outlines recommended daily, weekly, and annual maintenance tasks.

Technical Data - Page 16

Engine, Ignition, and Fuel Specifications

Provides data on engine, ignition system, fuel and oil capacities.

Sound, Vibration, and Cutting Specifications

Details noise levels, vibration levels, cutting system, and width.

EC Declaration of Conformity

Product Compliance with European Directives

Official declaration that the product complies with relevant European directives.