To Next PageTo Next PageTo Previous PageTo Previous Page
Loading...
Need help?Do you have a question about the Husqvarna PR 17 and is the answer not in the manual?
General| Brand | Husqvarna |
|---|---|
| Model | PR 17 |
| Category | Lawn Mower |
| Language | English |
Detailed checks and adjustments performed before the machine is delivered to the customer.
Initial maintenance tasks to be performed after the first 8 hours of operation.
Guidelines for safely driving and transporting the machine on public roads.
Instructions and precautions for towing the machine, especially with a hydrostatic transmission.
Defines the intended purpose and limitations of the machine's use.
Information on dealer support, service, and obtaining spare parts.
Location and importance of identifying machine and engine serial numbers for parts and service.
Explanation of various symbols used on the machine and in the manual for safety and operation.
Recommendations for insuring the machine, including types of coverage.
General safety guidelines covering operation, environment, and user responsibilities.
Specific safety precautions and techniques for operating the machine on slopes.
Safety warnings and precautions related to children around the machine.
Safety procedures to follow before and during maintenance tasks.
Safety guidelines for transporting the machine, including securing it properly.
Identifies and labels all the controls and their positions on the machine.
Explanation of how the speed limiter works using two pedals for forward and reverse.
Description of the throttle control for regulating engine speed and blade rotation.
Information about the chronometer that tracks engine running hours.
Step-by-step instructions on how to apply and release the parking brake.
Explains the function of the choke lever for cold starting and enriching the fuel mixture.
Details on the types of cutting units compatible with the machine.
Function of the lever used to position the cutting unit for transport or mowing.
Describes the backup lever for cutting unit positioning and securing.
How to adjust the cutting height using the dedicated lever.
Information on seat adjustment for comfort and operation.
Instructions and warnings for refueling the machine with petrol.
Operation of lights and the use of the power outlet.
Function of the release control for moving the machine when the engine is off.
Operation of clutch controls for engaging/disengaging the drive system.
Advice and techniques for optimal mowing results and machine operation.
Preliminary checks and information before starting the engine and operation.
Step-by-step guide for starting the engine safely.
Procedure for starting the engine using jump leads with a weak battery.
Instructions on how to operate and drive the machine.
How to brake the machine effectively using the drive system and parking brake.
Procedures for safely stopping the engine after operation.
A comprehensive schedule of maintenance tasks and their intervals.
How to clean the machine after use, including warnings about pressure washers.
Instructions for removing various covers for access to components.
Procedure for checking and adjusting the machine's steering cables.
Detailed steps for adjusting the parking brake for both types of machines.
How to check and adjust the choke wire for proper engine starting.
Steps for replacing the fuel filter at recommended intervals.
Procedure for checking and cleaning the fuel pump's air filter.
How to check and clean the transmission's air intake for proper cooling.
Instructions for replacing the engine's air filter to maintain performance.
How to check and maintain the battery acid level.
Information about the ignition system and spark plug maintenance.
Step-by-step guide for replacing the spark plug.
How to clean the engine and muffler to prevent fire hazards and ensure cooling.
How to verify the functionality of the machine's safety systems.
Instructions for replacing the machine's light bulbs.
Location and replacement of the main fuse and power outlet fuse.
Recommended tyre pressures for optimal performance and cutting.
How to check and clean the engine's air intake for proper cooling.
Detailed instructions for removing and replacing the rear drive belt.
Steps for replacing the drive belt for the hydraulic pump on AWD models.
Procedure for replacing the centre belt on the cutting unit.
Instructions for replacing the front belt, often related to snow blade attachment.
Steps for fitting the cutting head, including safety warnings.
How to safely remove the cutting unit from the machine.
Procedure to adjust the cutting unit's ground pressure for optimal mowing.
How to check and ensure the cutting unit is parallel for even cutting.
Steps to adjust the cutting unit's parallelism.
Instructions for replacing the belts on the cutting unit.
Instructions on how to place the cutting unit in service position for maintenance.
How to check the condition and tightness of the cutting blades.
Steps to remove the BioClip plug to change cutting unit function.
General guidelines and precautions for lubricating machine parts.
How to lubricate various control cables to ensure smooth operation.
Lubrication points for the pedal system in the frame tunnel.
How to lubricate chains within the frame tunnel.
Lubrication points for cutting height adjustment mechanisms.
Lubrication instructions for the driver's seat adjustment runners.
Lubrication of controls and lever bearings.
How to lubricate the belt adjuster mechanism.
Procedure for checking and topping up the engine oil.
Instructions for changing the engine oil.
How to lubricate the hydrostatic cable and associated components.
Steps for replacing the engine oil filter.
Procedure for changing the hydraulic system's oil filter.
How to lubricate the parking brake cables.
Procedure for checking and topping up the transmission oil.
Identification of electrical and hydraulic components for PR 17/AWD models.
Identification of electrical and hydraulic components for PF 21/AWD models.
A schematic diagram illustrating the machine's wiring system.
Details and maintenance of the machine's hydraulic system.
Instructions for preparing and storing the machine during winter or long periods.
Information about a protective cover for storage or transport.
Advice on performing service during the low season for optimal function.
Specifications related to the physical dimensions of the machine.
Details about the engine brand, model, power, and fuel requirements.
Technical details of the battery, spark plug, and electrical components.
Measured noise and vibration levels according to standards.
Details regarding the transmission brand and oil requirements.
Information on compatible cutting units and their dimensions.
Formal declaration that the machine complies with relevant EU directives.
