Husqvarna Rider 111B User Manual

4 – English
Ser vice journal
Pre-deliver y service
1 Charge the battery for 4 hours at max. 3 amp.
2 Attach the cutting unit to the machine, see Attaching the cutting unit.
3 Fit steering wheel, seat and any optional equipment.
4 Check and adjust tyre pressure (60 Kpa, 0.6 bar, 9 PSI).
5 Check that the right amount of oil is in the engine.
6 Connect battery.
7 Fill with fuel and start engine.
8 Check that machine does not move in neutral.
9 Check:
Forward drive.
Reverse drive.
Operation of blades.
Seat safety switch.
Lif lever safety switch.
Safety switch for parking brake.
Check engine speed. See the Technical data section.
10 Tell customer about:
Needs and benefits of following the service schedule.
Servicing and the influence of this journal on the second-hand value of the machine.
Range of applications for BioClip.
Complete proof of sale etc.
Pre-delivery service carried out. No outstanding problems. Certified:
____________________________________________________________________
Date , mileage, stamp, signature
After the first 8 hours
1 Change engine oil

Husqvarna Rider 111B Specifications

General

Engine manufacturer	Briggs & Stratton
Cutting width	85 cm
Cutting Height Adjustment	Central
Drive System	Rear-Wheel Drive
Weight	193 kg
Fuel Tank Capacity	4 l