English
–
5
KEY
T
O SYMBOLS
Symbols
These symbols are on the machine and in the instr
uctions.
WARNING! Careless or incorrect use can
result in serious or f
atal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure y
ou understand
the instructions before using the machine.
Always wear:
• Approved hearing protection
This product is in accordance with
applicable EC directiv
es.
Reverse
Neutral
Fast
Slow
Stop the engine.
Battery
Choke
Fuel
Oil level
Cutting height
Backwards
Forwards
Ignition
Warning: rotating parts. Keep hands and feet
clear
.
Clutch in
Clutch out
Parking brake
Brake
Clutch
Noise emission to the environment
according to the European Community’
s
Directive. The machine’s emission is
specified in chapter Technical data and on
label.
Rotary blades Keep hands and feet
aw
ay from under the hood when the
engine is running
Never drive across a slope
Never use the machine if persons,
especially children, or animals
, are in the
vicinity
Ne
ver carry passengers on the machine
or equipment
Drive very slowly if no cutting unit is fitted
The cutting deck must be fitted at
full speed.
Switch off the engine and take off
the ignition cable bef
ore repairs or
maintenance
To Next Page
Loading...
Need help?
General
