Name: Husqvarna Rider 112C
Brand: Husqvarna
Rating: 5 (1 reviews)

To Next Page

To Previous Page

English – 23

Maintenance

4 Check that the lever for setting the cutting height is in the

S position.

5 Put the lifting lever in the mowing position.

6 Release the clip and lift off the belt guard.

7 Disengage the spring for the drive belt tensioning wheel.

8 Lift of the drive belt.

9 Grab the upper pipe construction of the deck and pull it

out.

10 Lift off the deck and lean it against the machine or a wall.

Fitting the cutting head

1 Push the cutting deck in and make sure the guide bolts ﬁt

into the grooves on the deck frame, one on each side.

2 Fit the cutting deck's pipe together with the deck frame's

pipe.

3 Grip the front edge of the deck and slide it in.

4 Push the deck until you feel the pipes touch bottom.

5 Fit the belt according to the picture.

Questions and Answers:

Need help?

Do you have a question about the Husqvarna Rider 112C and is the answer not in the manual?

Husqvarna Rider 112C Specifications

General