English
–
5
KEY
T
O SYMBOLS
Symbols
These symbols are on the machine and in the instr
uctions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator’s manual
carefully and make sure you understand
the instructions before using the machine.
Alw
ays wear:
• Approved hearing protection
This product is in accordance with
applicable EC directives.
F
ast
Slo
w
Stop the engine
.
Chok
e.
Fuel
Oil le
vel
Cutting height
Bac
kwards
F
orwards
Ignition
W
arning: rotating parts. Keep hands and feet
clear.
Clutch in
Clutch out
Parking brake
Brake
Clutch
Noise emission to the environment
according to the European Community’s
Directive. The machine’s emission is
specified in the Technical data chapter and
on the label.
Rotar
y blades.
Do not insert your hands or feet under
the cutting deck when the engine is
running.
Do not use the Rider on g
round that slopes
more than 10
°
.
Ne
ver use the machine if persons,
especially children, or animals, are in the
vicinity
Ne
ver carry passengers on the machine or
equipment
Dr
ive very slowly if no cutting unit is fitted
Before and during reversing procedures,
look behind you.
Watch your hands and other body parts
so they do not get caught and crushed
between the belt and belt pulley.
Switch off the engine and tak
e off the ignition
cable before repairs or maintenance
>10
To Next Page
Loading...
Need help?
General
