SERVICE WORK ON THE CHASSIS 12
113
12.16 Mounting the side cover
V01486-10
Main work
–
Position the side cover, and mount and tighten screws
1
.
Guideline
Screw, trim M5x12 3.5 Nm (2.58 lbf ft)
–
Mount and tighten screws
2
.
Guideline
Screw, front spoiler M5x17 3.5 Nm (2.58 lbf ft)
– Repeat these steps on the opposite side.
Finishing work
– Mount the seat. ( p. 109)
12.17 Removing front fender
Preparatory work
– Remove the headlight mask with the headlight. ( p. 187)