ELECTRICAL SYSTEM 15
191
15.10 Changing the parking light bulb
Note
Damage to reflector Grease on the reflector reduces the light intensity.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
– Clean and degrease the bulbs before mounting.
– Do not touch the bulbs with your bare hands.
Preparatory work
– Remove the headlight mask with the headlight. ( p. 187)
E00038-10
Main work
–
Pull bulb socket
1
out of the reflector.
–
Pull parking light bulb
2
out of the bulb socket.
– Insert a new parking light bulb in the bulb socket.
Position light (W5W / socket W2.1x9.5d) ( p. 250)
– Insert the bulb socket in the reflector.
Finishing work
– Install the headlight mask with the headlight. ( p. 188)
– Check the headlight setting. ( p. 192)
To Next Page
Loading...
Need help?
General
