15 ELECTRICAL SYSTEM
182
15.5 Changing the ABS fuses
Warning
Fire hazard Incorrect fuses overload the electrical system.
– Only use fuses with the required ampere value.
– Do not bypass or repair fuses.
Info
Two fuses for the ABS are located under the seat. These fuses protect the return pump and the
hydraulic unit of the ABS. The third fuse, which protects the ABS control unit, is located in the fuse box.
Preparatory work
– Remove the seat. ( p. 109)
– Pull off engine electronics control unit from the holder and
hang it to the side.
To Next Page
Loading...
Need help?
General
