604345 4-9 REV F
Seat Adjustment
There are two seat options available for these mowers. The
following are the adjustments for each of these seats.
Seat (Option 1)
This seat can be adjusted five different ways to obtain the
most comfortable position:
1. Back angle (Figure 4-15)
2. Forward and rearward travel (Figure 4-15)
3. Weight (Figure 4-15)
4. Isolator (Figure 4-15)
5. Armrest (Figure 4-16)
Seat (Option 2)
This seat can be adjusted five different ways to obtain the
most comfortable position:
1. Back angle (Figure 4-18)
2. Forward and rearward travel (Figure 4-17)
3. Weight (Figure 4-17)
4. Lumbar (Figure 4-19)
Figure 4-12
Figure 4-13
Figure 4-14
Resharpening
pattern
Do not sharpen to original pattern (below). It is
easier to get a straight cutting edge following
the resharpening pattern shown above.
Original edge
Warped Blade (Replace)
Straight Blade
Cutting
plane
Comparison of Warped and Straight Blades
Cutting edge
Twisted Blade Edge
(replace)
Cutting edgeCutting Plane
Straight Blade Edge
End view of blades, comparing
twisted and straightened blades
Figure 4-15
Figure 4-16
Forward/rearward
travel lever
Weight adjusting control
Back angle
control
Isolator