10.7 Tools and torque
Tools and torque required for installation and electrical connections.
Tools, model Object Torque
Torque screwdriver, T25
Screws for the cover
2.5Nm
Screw for second protective
grounding connection
Screws for connecting the inverter
and wall bracket
Flat-head screwdriver,
blade with 3.5mm
Sunclix DC connector
Antenna Hand-tight
Socket
wrench
Open end of 30 Swivel nut of M25 cable gland Hand-tight
Open end of 15 Swivel nut of sunclix connector 2.0Nm
Open end of 10 Hex bolts for wall bracket Hand-tight
Wire stripper Peel cable jackets
Crimping tools Crimp power cables
Hammer drill,
drill bit of Ø10
Drill holes on the wall
Rubber mallet Hammer wall plugs into holes
Cable cutter Cut power cables
To Next Page
Loading...
Need help?
General
