Maintenance
329
Tyre replacement
If the tyre is worn evenly, a tread wear
indicator will appear as a solid band
across the tread. This shows there is less
than 1.6 mm (1/16 inch) of tread left on
the tyre. Replace the tyre when this
happens.
Do not wait for the band to appear across
the entire tread before replacing the tyre.
OEN076053
Tread wear indicator
WARNING - Replacing
tyres
To reduce the chance or serious or
fatal injuries from an accident
caused by tyre failure or loss of
vehicle control:
• Replace tyres that are
worn, show uneven wear,
or are damaged. Worn
tyres can cause loss
of braking effectiveness, steering
control, and traction.
• Do not drive your vehicle with too
little or too much pressure in
your tyres. This can lead to
uneven wear and tyre failure.
• When replacing tyres, never mix
radial and bias-ply tyres on the
same car. You must replace all
tyres (including the spare) if
moving from radial to bias-ply
tyres.
(Continued)
(Continued)
• Using tyres and wheel other than
the recommended sizes could
cause unusual handling
characteristics and poor vehicle
control, resulting in a serious
accident.
• Wheels that do not meet
HYUNDAI’s specifications may fit
poorly and result in damage to
the vehicle or unusual handling
and poor vehicle control.
To Next Page
Loading...
Need help?
General
