Maintenance
509
Headlight bulb
Headlight, turn signal light and
position light
1. Turn off the engine and open the
hood.
2. Loosen the retaining bolts.
(Continued)
• If a bulb becomes damaged or
cracks, replace it immediately
and carefully dispose of it.
• Wear eye protection when
changing a bulb. Allow the bulb
to cool down before handling it.
G270A03O
WARNING -
Halogen bulbs
• Halogen bulbs contain
pressurized gas that will produce
flying pieces of glass if broken.
• Always handle them carefully,
and avoid scratches and
abrasions. If the bulbs are lit,
avoid contact with liquids. Never
touch the glass with bare hands.
Residual oil may cause the bulb
to overheat and burst when lit. A
bulb should be operated only
when installed in a headlight.
(Continued)
OHA071023
To Next Page
Loading...
Need help?
General
