19
Starting The Lawnmower
Cold Starting Procedure
NOTE - You MUST ensure the
mower has the correct oil and fuel level
before operation. Images may vary
depending on the model of machine.
!
Before Each Use
• Always ensure that the mower is in a safe
working condition. Inspect the blade, check
safety devices and guards and check all nuts,
bolts and screws are secure.
• Check the oil level, go to page 28 for
instructions.
• Fill the fuel tank with unleaded petrol. Go to
page 28 for instructions.
• Check the OPC cable, if there is more than
10mm movement in the OPC lever before the
cable begins to move, then the OPC cable will
require adjustment. Go to page 17 for
instructions.
STEP 1
Make sure the blade is free of long grass and
the cutting height is set to maximum.
STEP 2
Place the choke lever to the ‘START’ position.
STEP 2
Pull back the Operator Presence Control
(OPC) lever towards the main handle.
STEP 3
Pull the recoil starter handle gently until you
feel resistance.
STEP 4
Once you feel resistance, pull the starter
handle swiftly until the mower starts.
Continued
To Next Page
Loading...
Need help?
General
