20
Starting & Stopping The Lawnmower
STEP 5
Once the engine starts, move the choke lever
to the ‘RUN’ position
Warm Starting Procedure
STEP 1
Follow the procedure for cold start but remove
step 2 and leave the choke in the ‘RUN’
position.
Stopping Procedure
STEP 1
Release the OPC lever and the engine will
stop.
CAUTION - The engine and exhaust
will remain hot for a while after use. Ensure
the engine and exhaust have cooled before
carrying out any maintenance or storage.
Before stopping the machine, you must
allow the engine to idle for 30 seconds.
!
After Each Use
• Examine the blade for damage.
• Clean the machine if necessary, go to page
29 for more information on how to clean your
machine.
To Next Page
Loading...
Need help?
General
