Troubleshooting
Suspected malfunctions are often due to causes that the users can fix themselves.
Therefore check the product using this section. In most cases the problem can be
solved quickly.
b)
Battery pack empty
c)
Cable defective
d)
Switch/plug block defective
disconnected
f)
Mower standing in high
grass
g)
Mower housing is clogged
h)
Safety key is not inserted
i)
Battery is not correctly
inserted
a)
Contact an authorized service
center
b)
Charge battery pack
c)
Check the cable
d)
Contact an authorized service
center
e)
Contact an authorized service
center
f)
Start motor on shorter grass or
previously mowed area; change
cutting height if necessary
g)
Clean housing so that the blade
can run freely
h)
Insert safety key (Fig. 13)
i)
Remove the battery and reinsert
a)
Grass too tall or damp
b)
Mower housing is clogged
c)
Blades badly worn
d)
Battery performance
a) Correct the cutting height, Clean
housing, Replace blades, Check the
battery performance and charge the
battery if necessary
a) Replace or re-sharpen the blade;
contact an authorized service center,
Correct the cutting height