Handling (continued)
• Switch off the motor, remove the battery and wait for the
rotating blades to stop completely: before you dislodge
any blockages or clogs in the discharge chute or
mower deck; before carrying out any checks, cleaning,
maintenance or other work on the lawn mower; and
immediately after striking a foreign object. Examine the
mower for signs of damage and carry out any necessary
repairs before restarting and continuing to work with the
mower. If the lawn mower starts to vibrate oddly,
immediately switch it off and inspect it.
• Switch off the mower and remove the battery whenever
you leave the mower.
Additional safety points
• Make sure that all nuts, bolts and screws are tightened
securely and that the machine is in safe working
condition.
• Allow the mower to cool before you put it into an
enclosed area.
• To avoid the risk of fire, keep the motor housing and
ventilation slots clear of grass, leaves, oil and grease.
• Routinely check the grass basket for signs of wear and
impaired functionality.
• For your own safety, have worn or damaged parts
immediately replaced.
• Take care not to jam your fingers between moving
blades and stationary parts of the equipment while you
are adjusting the equipment.
• While you are carrying out maintenance work on the
blades, remember that the blades can still be moved
even if the power source has been switched off.
To Next Page
Loading...
Need help?
General
