Hyundai HYTR60Li User Manual

21
Assembly
Installing the handle
Note: Ensure the connection is properly secured. Tighten the knob until there is
no gap between the handle and front handle.
Installing the guard and edge guide
a). The safety guard (C) of the trimmer’s head can be installed with a single screw (K).
Slide the guard into place onto the head of the grass trimmer. On the underside
of the guard, right next to the spool casing, there is a small screw hole. Attach the
guard in place by fastening a screw. (See Fig. 2)
Fig. 2
b). Once the guard has been put into place, attach the edge guide (B) into the holes
mounted on either side of the front of the motor housing. The guide requires slight
stretching for installation, allowing each end to snap into its respective hole. (See
Fig. 3)
Fig. 3

Hyundai HYTR60Li Specifications

General

Battery charger included	Yes
Type	String trimmer
Head type	-
Handle type	D-loop handle
Cutting width	330 mm
Product color	Black, Blue
Rotational speed	8000 RPM
Cutting diameter (max)	- mm
Power source	Battery
Charging time	0.75 h
Operating time	40 min
Battery voltage	58 V
AC input voltage	230 V
Battery capacity	2.5 Ah
AC input frequency	50 Hz
Battery technology	Lithium

Weight and Dimensions

Depth	1710 mm
Width	350 mm
Length	260 mm
Weight	4000 g
Package depth	1336 mm
Package width	240 mm
Package height	170 mm
Package weight	4640 g