WARNING! In some countries regulations define what time of the day and on
what special days products are allowed to be used and what restrictions apply!
Ask your community for detailed information and observe the regulations in order
to preserve a peaceful neighborhood and avoid committing an offence!
Note: The trimming line will wear faster and require more feeding if the cutting or
edging is done along sidewalks, other abrasive surfaces or heavier weeds are
being cut.
Line feeding
During use, the tip of the trimming line will get shorter due to wear. Regularly check
the condition of the trimming line and adjust if necessary.
WARNING! Extensive vibration of the product during operation is an indication
of damage! The product should be promptly inspected and repaired!
Note: This product is equipped with an auto-feed head. Do not bump the
trimming head on the ground as this would damage the product.
Auto-feeding
1. With the product running, release on/off switch to let it stop completely.
2. Press the lock-off button and on/off switch to start the product.
Note: The line will extend about 8mm with each stop and start until the line
reaches the length of the knife. Do not stop and start frequently as the trimming
line may auto-feed unintentionally and cause you to use a lot of line.
After use
1. Switch the product off, remove the battery back and let it cool down.
2. Check, clean and store the product as described below.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
