5-102
Driving your vehicle
System setting and activation
System setting
• The driver can activate the SLIF by
selecting 'User Settings → Driving
Assist → Speed Limit Information
Function'.
• When the SLIF is activated, the
symbols appear on the instrument
cluster to display the speed limit
information and overtaking restric-
tion.
• When the SLIF is activated in the
navigation setting, the above infor-
mation and the restriction are also
displayed on the navigation.
System activation
• The SLIF displays the speed limit
information and alerts the overtak-
ing restriction, when your vehicle
passes by the relevant traffic signs.
• The SLIF restores the previous
speed limit information, right after
the ignition switch is placed to the
ON position.
• You may find different speed limit
information for the same road. The
information is displayed depending
on the driving situations. Because,
traffic signs with additional sign
(e.g. rainy, arrow, etc.) are also
detected and compared with vehi-
cle internal data (e.g. wiper opera-
tion, turn signal, etc.).
• The SLIF automatically updates
the speed limit information in the
following situations.
- The vehicle changes driving
direction, or makes a U-turn.
- The vehicle enters or exits from a
highway, country road, etc.
- The vehicle enters or exits from a
town, village, etc.
Information
The speed limit information on the
instrument cluster may differ from
the one on the navigation. In this case,
check the speed unit setting on the
navigation.
Display
• The symbol is displayed on the
instrument cluster and the naviga-
tion, when the SLIF does not have
any reliable speed limit informa-
tion.
i
WTL-220
■ No reliable speed limit information
To Next Page
Loading...
Need help?
General
