5-90
System setting and operation
System setting
• Setting Blind-Spot Safety function
- The driver can activate the sys-
tem by placing the ignition switch
to the ON position and by select-
ing 'User settings → Driver assis-
tance → Blind-spot safety' in the
cluster LCD display.
- BCW turns on and gets ready to
be operated when 'Warning only'
is selected. Then, if a vehicle
approaches the driver's blind spot
area a warning sounds.
- The system is deactivated and
the indicator on the BCW button
turns off when 'Off' is selected.
• If you press the BCW button while
'Warning only' is selected, the indi-
cator on the button turns off and
the system deactivates.
• If you press the BCW button while
the system is cancelled, the indica-
tor on the button illuminates and
the system activates.
When the system is initially turned
on and when the vehicle is turned
off then on again while the system
is in activation, the warning light
will illuminate for 3 seconds on the
outside rearview mirror.
• If the vehicle is turned off then on
again, the system maintains the
last setting.
• Selecting Warning Timing
The driver can select the initial
warning activation time from the
User Settings in the cluster LCD
display by selecting 'User settings
→ Driver assistance → Warning
timing → Normal/Late'.
Driving your vehicle
OAEPH059651L
OAEPH059033L
OAEPH059648N
To Next Page
Loading...
Need help?
General
