7-64
Maintenance
Tail lamp (Type A) and back-up
lamp
1. Open the liftgate.
2. Remove the service cover using a
flat-blade screwdriver.
3. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
4. Pull the bulb out of the socket.
5. Insert a new bulb into the socket.
High Mounted Stop Lamp
Replacement
1. Open the tailgate.
2. Gently remove the cover of the
tailgate trim.
3. Remove the spoiler plug hole.
4. Disconnect the electrical connec-
tor.
5. Loosen the mounting bolts and
remove the spoiler.
6. Remove the high mounted stop
light assembly after disconnecting
the connector.
7. Reinstall a new light assembly in
the reverse order of removal.
OAEPH078042
OAEPH078040
■ Type A
■ Type B
Tail lamp
Back up lamp
Back up lamp
OAE079043
OAE079025
To Next Page
Loading...
Need help?
General
