Maintenance
427
G180201AEN
Front windshield wiper blade
For your convenience, move the wind-
shield wiper blades to the service posi-
tion as follows;
1. Remove the key from the ignition
switch.
2. Move the wiper switch to the single
wiping position ( ) and hold the
switch until the wiper arm is in the fully
up position.
3. Raise the wiper arm. 4. Press the button and slide the blade
assembly upward.
OEN076057
OEN076049 OEN076047
CAUTION
Do not allow the wiper arm to fall
against the windshield, since it may
chip or crack the windshield.
To Next Page
Loading...
Need help?
General
