Maintenance
687
G220101AEN
Headlight bulb
1. Open the hood.
2. Loosen the retaining bolts and remove
the headlight assembly from the body
of the vehicle.
3. Disconnect the power connector from
the back of the headlight assembly.
4. Remove the headlight bulb cover by
turning it counter clockwise.
5. Disconnect the headlight bulb socket
connector.
6. Unsnap the headlight bulb retaining
wire by depressing the end and push-
ing it upward.
7. Remove the bulb from the headlight
assembly.
(Continued)
• If a bulb becomes damaged or
cracked, replace it immediately
and carefully dispose of it.
• Wear eye protection when chang-
ing a bulb. Allow the bulb to cool
down before handling it.
OHD076046 OEN079062
WARNING -
Halogen bulbs
• Halogen bulbs contain pressur-
ized gas that will produce flying
pieces of glass if broken.
• Always handle them carefully,
and avoid scratches and abra-
sions. If the bulbs are lit, avoid
contact with liquids. Never touch
the glass with bare hands.
Residual oil may cause the bulb
to overheat and burst when lit. A
bulb should be operated only
when installed in a headlight.
(Continued)
To Next Page
Loading...
Need help?
General
