Related documentation
Use this information to identify and locate related blade server documentation.
This Installation and User's Guide contains general information about the blade
server, including how to install supported optional devices and how to configure
the blade server. The following documentation also comes with the blade server:
v Problem Determination and Service Guide
This document is in Portable Document Format (PDF) on the IBM Documentation
CD. It contains information to help you solve problems yourself, and it contains
information for service technicians.
v Safety Information
This document is in PDF on the IBM Documentation CD. It contains translated
caution and danger statements. Each caution and danger statement that appears
in the documentation has a number that you can use to locate the corresponding
statement in your language in the Safety Information document.
v Warranty and Support Information
This document is in PDF on the IBM Documentation CD. It contains information
about the terms of the warranty and getting service and assistance.
v Environmental Notices and User Guide
This document is in PDF on the IBM Documentation CD. It contains translated
environmental notices.
v Integrated Management Module User's Guide
This document is in PDF on the IBM Web site at http://www.ibm.com/
systems/support/. This document explains how to use the functions of the IMM
installed in an IBM server. The IMM works with IBM System x Server Firmware
to provide systems-management capability for System x and BladeCenter
servers.
v Advanced Management Module Messages Guide
This document is in PDF on the IBM Web site at http://www.ibm.com/
systems/support/. This document provides a complete list of all non-device
specific events and recommended actions, sorted by event ID. Device specific
event information is in the documentation for the device.
v Advanced Management Module User's Guide
This document is in PDF on the IBM Web site at http://www.ibm.com/
systems/support/. This document contains information about configuring the
advanced management module and managing components that are installed in
an IBM
®
BladeCenter
®
unit. Information about configuring management
modules other than the advanced management module is in a separate
document.
Depending on your BladeCenter product, additional documents might be included
on the IBM Documentation CD. In addition to the documentation in this library, be
sure to review the Planning and Installation Guide for your BladeCenter unit for
information to help you prepare for system installation and configuration. To check
for updated documentation and technical updates, complete the following steps.
Note: Changes are made periodically to the IBM Web site. The actual procedure
might vary slightly from what is described in this document.
1. Go to http://www.ibm.com/systems/support/.
2. Under Product support, click BladeCenter.
3. Under Popular links, click Publications lookup.
Chapter 1. Introduction 3
To Next Page
Loading...
Need help?
General