19
Chapter 3: BIOS Setup Utility
Drive A
These items define the characteristics of any diskette drive attached to the
system. You can connect one or two diskette drives.
Video
The item defines the video mode of the system. This motherboard has a built-in
VGA graphics system; you must leave this item at the default value.
Halt On
This item defines the operation of the system POST (Power On Self Test)
routine. You can use this item to select which types of errors in the POST are
sufficient to halt the system.
Base Memory, Extended Memory, and Total Memory
These items are automatically detected by the system at start up time. These
are display-only fields. You cannot make changes to these fields.
Advanced BIOS Features Page
This page sets up more advanced information about your system. Handle this
page with caution. Any changes can affect the operation of your computer.
Phonex-AwardBIOS CMOS Setup Utility
Advanced BIOS Features
Help Item
f
f
X
X
CPU Feature [Press Enter]
Hard Disk Boot Priority [Press Enter]
CPU L1 & L2 Cache [Enabled]
CPU L2 Cache ECC Checking [Enabled]
Quick Power On Self Test [Enabled]
First Boot Device [Floppy]
Second Boot Device [LS120]
Third Boot Device [CDROM]
Boot Other Device [Enabled]
Swap Floppy Drive [Disabled]
Boot Up Floppy Seek [Disabled]
Boot Up NumLock Status [On]
Typematic Rate Setting [Disabled]
Typematic Rate (Chars/Sec) 6
Typematic Delay (Msec) 250
Security Option [Setup]
MPS Version Control For OS [1.4]
OS Select For DRAM > 64 MB [Non-OS2]
Video BIOS Shadow [Enabled]
Menu Level
f
: Move Enter: Select +/-/PU/PD: Value F10: Save Esc: Exit F1: General Help
F5: Previous Values F6: Fial-Safe Defaults F7: Optimized Defaults
f
f
To Next Page
Loading...
Need help?
General
