Tables
1. Storwize V7000 Unified library ......xx
2. Other IBM publications ........xxi
3. IBM documentation and related websites xxii
4. Access information for your system .....3
5. Installation error code actions ......12
6. Error messages and actions .......13
7. CLI command problems ........20
8. Ethernet connections available with the file
modules .............25
9. Ethernet ports and type of connections. 26
10. How to connect Fibre Channel cables from file
modules to the control enclosure. Refer to the
previous graphic. ..........31
11. Error code port location mapping .....32
12. Fibre Channel cabling from the file module to
the control enclosure. .........33
13. LED states and associated actions. For the
Fibre Channel adapters on the file module
check the amber LED lights next to the port. . 33
14. Fibre Channel connection on the node canister
LED state and associated actions .....33
15. LED indicators, corresponding problem causes,
and corrective actions .........37
16. Power-supply LEDs ..........41
17. Power-supply unit LEDs ........43
18. Power LEDs ............45
19. System status and fault LEDs ......45
20. Control enclosure battery LEDs ......46
21. Status of volume ...........59
22. State of drives............60
23. SMART ASC/ASCQ error codes and messages 65
24. Error code information .........76
25. Originating role information .......76
26. Ethernet role and port reference......77
27. Ethernet switch error code categories ....77
28. Originating file module and file module
specific hardware code – Code 0, 2, 4 ....77
29. Originating file module specific software code
– Code 1, 3, 5 ............78
30. Storage enclosure hardware code – Code 6 78
31. Error code break down.........79
32. Error code break down.........80
33. Components identified as customer replaceable
units (CRUs) and field replaceable units
(FRUs) ..............81
34. System board fan locations .......135
35. System status with 460-watt power supplies
installed .............137
36. Storwize V7000 Unified logical devices and
physical port locations ........156
37. Hostname and service IP reference ....158
38. Description of data fields for the event log 182
39. Notification types ..........183
40. Bad block errors ..........188
41. Power-supply unit LEDs ........200
42. Power LEDs ............201
43. System status and fault LEDs ......201
44. Control enclosure battery LEDs .....202
45. Upgrade error codes from using the
applysoftware command and recommended
actions ..............266
46. Upgrade error codes and recommended
actions ..............267
© Copyright IBM Corp. 2011, 2012 ix
|
|
||
To Next Page
Loading...
Need help?
General