329 Summary
of
Useful SSP Procedures
The following table describes useful SSP procedures.
See
the System Reference manual and the Program
Problem Diagnosis and Diagnostic Aids manual for more information.
Key
in
This Press
SSP
Name
This
Key
Description or Action
ALTERCOM Help
Gives the prompt to change some communications parameters.
(For the
display station only).
See
"930 Displaying Communications Configuration
Status" on page
9-5.
APAR
Help
Gives the prompt to create
APAR
diskettes or to copy diagnostic information
to disk or diskette.
BSCTEST Enter Gives the prompt to perform the
BSC
on-line tests.
BUILD Enter Displays the data on disk after a disk error with the option to correct data.
COMMTEST Enter
Shows the menu with options to perform the communications diagnostic tests.
COPYIl Help Gives the prompt to copy files from a diskette to one or more other diskettes
with the same format. (Not for diagnostic diskettes)
DCOR
Enter Displays the communications configuration data set by the AL
TERCOM
STATUS
procedure.
COMM
DHOR
Enter
Displays the communications configuration data set by the
SETCOMM
STATUS
procedure.
COMCNFIG
DFA
Help Gives the prompt to print
or
display the selected system data areas from disk
or from a diskette made by the APAR procedure.
DIAGCOPY Enter
Copies files from any diagnostic diskette to one or more other diagnostic
diskettes with the same format.
DIAGINIT
Enter Initializes a diagnostic diskette.
DUMP
Help Gives the prompt to select
and
print or display information from the dump
file.
ERAP
Enter
Shows the menu with options to display or print the error log reports.
HISTCRT Enter Displays entries from the system history
file.
HISTORY Enter Gives the prompt to display or print selected entries from the system history
file.
ICFDEBUG
Help
Runs the
SSP-ICF debug program.
ICVERIFY
Help Gives the prompt to verify that an
SSP-ICF subsystem
is
installed correctly.
INIT
Help Gives the prompt to initialize a diskette. (Not for diagnostic diskettes)
OFF
Enter
Signs off the user.
PATCH Enter
Shows the menu with options to patch selected disk or diskette sectors.
Section
3.
General Procedures 3-11
To Next Page
Loading...
Need help?
General