IBM System x3550 M3 Type 4254 User Manual

11. Route the remote battery cable through the notches on the microprocessor 2
air baffle.
Attention: Make sure that the cable is not pinched and does not cover any
connectors or obstruct any components on the system board.
12. Connect the other end of the remote battery cable to the remote battery cable
connector on the battery carrier.
Attention: To avoid damage to the hardware, make sure that the black dot
on the remote battery cable connector faces away from the interposer card on
the adapter. Do not force the remote battery cable into the connector.
13. Install the battery on the microprocessor 2 air baffle:
a. Connect the battery cable to the battery cable connector on the battery
carrier.
Remote battery cable
PCI riser assembly
(slot 1)
Figure 68. Cable connection
Figure 69. Cable connection
Chapter 2. Installing optional devices 93

IBM System x3550 M3 Type 4254 Specifications

General

Brand	IBM
Model	System x3550 M3 Type 4254
Category	Server
Language	English