Installing Windows 3.11 Software
2
Select File from the Program Manager window; then select
Run... from the pull-down menu.
3
Insert the MPEG/Video Capture Driver Diskette for Windows
into the diskette drive; then type A:SETUP and press Enter.
Follow the instructions on the screen.
4
After the installation is complete, remove the diskette and
restart the computer to activate the Video Overlay/Capture
device driver.
To run the video capture and playback functions, refer to the Video
for Windows or compatible software manuals. To install the MPEG
device driver, proceed to the following section.
Installing the MPEG Device Driver for Windows 3.11
The MPEG device driver enables playback for MPEG motion videos,
CD-i movies, and video CDs.
Important
If this is not your first time installing the MPEG device driver for
Windows 3.11, remove IBM MPEG-2 and CD-i/VideoCD from the
Installed Driver list in the Drivers menu.
To install the MPEG device driver:
1
Install the Microsoft Win32s
**
driver:
a) Start Windows.
b) Select File from the Program Manager window; then select
Run... from the pull-down menu.
c) Insert the Microsoft Win32s Setup Diskette 1 into the
diskette drive; then type A:\SETUP and press Enter. Follow
the instructions on the screen.
d) After you have completed the installation, restart Windows.
2
Click on Control Panel from the Main window.
3
Click on Drivers; then click on the Add button.
4
Select Unlisted or Updated Driver; then click on OK.
198
IBM ThinkPad 760E, 760ED, or 760EL User's Guide
To Next Page
Loading...
Need help?
General