Table 50. Specifications for power cords used with the IBM System Storage TS3500 Tape Library, Models L23, D23,
L53, and D53 (continued)
Length and Type of Power Cord
Part Number
and Feature
Code
1
Type of Service Receptacle
Dual 4.3 m (14 ft.) non-watertight, 250 V ac, 10
A, GB 2099.1, 1002. This power cord is for
China.
39M5204 / 9980 Uses receptacle #3
Dual 4.3 m (14 ft.) non-watertight, 250 V ac, 15
A, with earth pin KS C8305, K60884-1. This
power cord is for Korea.
39M5217 / 9981 Uses receptacle #6
Dual 4.3 m (14 ft.) non-watertight, 250 V ac, 10
A, CNS 10917-3. This power cord is for Taiwan.
39M5252 / 9982 Uses receptacle #5
Dual 4.3 m (14 ft.) non-watertight, 250 V ac, 16
A, SANS 164-1. This power cord is for South
Africa.
39M5142 / 9983 Uses receptacle #7
Dual 4.3 m (14 ft.) 250 V ac, 15A, single phase
line cord, non-watertight twistlock 20A
receptacles. This power cord is for US and
Canada.
23R9760 / 9984
NEMA L6-20R
Uses receptacle #8
Dual 4.3 m (14 ft.) 250 V ac, 15A, single phase
line cord, watertight 15A plugs. This power cord
is for US and Canada.
23R9972 / 9985
Russellstoll 3743U2 or 9R23U2W receptacles, or
Russellstoll 3913U2 or 9C23U2 connectors
Uses receptacle #9
Dual 4.3 m (14 ft.) non-watertight, 250 V ac, 10
A power cord with IEC 60320 C14 connector.
This power cord may be used world wide to
connect to spare outlets on FC 1950 PDUs in an
adjacent library frame or to a
customer-provided PDU that is mounted
external to the library frames.
46X7337 / 9989
IEC 60320 C13
Uses receptacle #13
Dual 4.3 m (14 ft.) power cords with NEMA
L6–30P non-watertight 30A plug, 200–240 V ac,
30 Amps. This power cord is for US, Canada,
Latin America, and Japan.
39M5416 / 9954
(Used with FC
1950 only)
NEMA L6–30R
Uses receptacle #10
Dual 4.3 m (14 ft.) power cords with watertight
Russellstoll 3750DP 30A plug, 200–240 V ac, 30
Amps. This power cord is used in US, Chicago,
Canada, Latin America, and Japan.
39M5418 / 9955
(Used with FC
1950 only)
Russellstoll 3753 or 9R33UOW receptacle, or a
Russellstoll 3933 or 9C33UO connector
Uses receptacle #11
Dual 4.3 m (14 ft.) power cords with IEC-309
p+n+g 32A plug, 200–240 V ac single phase, 32
Amps. This power cord is used in Europe, the
Middle East, and Africa.
39M5414 / 9956
(Used with FC
1950 only)
IEC-309 p+n+g
Uses receptacle #2
Dual 4.3 m (14 ft.) power cords with PDL
56P332 32A plug, 200–240 V ac single phase, 32
Amps. This power cord is used in Australia and
New Zealand.
39M5419 / 9957
(Used with FC
1950 only)
1–gang, 3–pin 32A socket, PDL 56SO332 or
equivalent
Uses receptacle #12
Dual 4.3 m (14 ft.) non-watertight power cords
with 30A plug type Shin Ju SJ-3302, 200–240 V
ac, 30 Amps. This power cord is used in North
and South Korea.
39M5420 / 9958
(Used with FC
1950 only)
200–250 V ac single phase
Uses receptacle #3
Chapter 2. Physical planning specifications 129