v Video device driver
v Firmware-update utility program
To download and install the software and firmware, complete the following steps.
Note: Changes are made periodically to the IBM Web site. The actual procedure
might vary slightly from what is described in this document.
1. Go to http://www.ibm.com/systems/support/.
2. Under Product support, click System x.
3. Under Popular links, click Software and device drivers.
4. Click System x3200 M2 to display the matrix of downloadable files for the
server.
5. Select the software or firmware package that you want to install. On the next
page, click the link for each file that you want to download. Follow the
instructions that are displayed.
6. Repeat step 5 until you have downloaded all the files that you need.
7. Follow the instructions in the Remote Supervisor Adapter II SlimLine readme file
that you downloaded to install the software and firmware.
8. Restart the server after the software and firmware are installed.
Completing the setup
See the documentation that comes with IBM Remote Supervisor Adapter II SlimLine
for instructions for completing the configuration, including the following procedures:
v Configuring the Ethernet ports
v Defining login IDs and passwords
v Selecting the events that will receive alert notifications
v Monitoring remote server status by using the Remote Supervisor Adapter II
SlimLine Web-based interface
v Controlling the server remotely
v Virtually attaching a remote diskette drive, CD or DVD drive, or disk image to the
server
After you configure the Remote Supervisor Adapter II SlimLine, use the Web-based
interface to create a backup copy of the configuration so that you can restore the
configuration, if you have to replace the adapter. For more information, see the
Remote Supervisor Adapter II SlimLine documentation.
Chapter 2. Configuration information and instructions 31
To Next Page
Loading...
Need help?
General