8
3
BASIC OPERATION
■ Setting a frequency
D Using the [Y]/[Z] keys
q Rotate [VOL] to turn ON power, then push [CLR] to select
the frequency mode if a memory CH number appears on
the function display.
w Push [Y]/[Z] to set the frequency.
- For the IC-A15 only -
• The 1 MHz tuning step is selectable. Push [FUNC]
,
then
push [Y]/[Z]. Push [FUNC] again to return to normal
tuning.
D Using keypad (IC-A15 only)
q Rotate [VOL] to turn ON power, then push [CLR] to select
the frequency mode if a memory CH number appears on
the function display.
w Push 5 appropriate digit keys to input the frequency.
• Push [1] as the 1st digit.
• When a wrong digit is input, push [CLR] to clear, then repeat
step w again.
• Push [ENT] to enter consecutive zero digits.
• Only [2], [5], [7] or [0] can be entered as the 5th and final digit.
[EXAMPLE]
• 111.225 MHz: Push
[1], [1], [1], [2], [2]
• 117.250 MHz: Push
[1], [1], [7], [2], [5]
• 120.000 MHz: Push
[1], [2], [ENT]
• 125.300 MHz: Push
[1], [2], [5], [3], [ENT]
2
3
[FUNC]
[Z]
[ENT]
[CLR]
[Y]
Keypad
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
To Next Page
Loading...
Need help?
General
