Icom IC-A15 User Manual

12
4
MEMORY OPERATION
■ Memory channel selection
The IC-A15 has 200 memory channels (20 channels in 10
banks, default setting) and the IC-A15S has 100 memory chan-
nels for storing often-used frequencies.
q Push [MR] to enter the memory mode.
• The memory mode icon appears and a memory channel num-
ber is briefly displayed.
• The memory bank number is also displayed on the IC-A15.
Using [Y]/[Z]:
w Push [Y]/[Z] to select the memory CH number.
• The memory channel number is briefly displayed, then the
entered frequency (or memory name, if entered) is displayed.
• If no memory channel is entered, no memory channels can be
selected.
Using the Keypad— IC-A15 only:
w Push 2 appropriate digit key (00 to 99, depending on the
bank setting) to select the memory channel number, then
push [ENT].
• The memory channel number is briefly displayed, then the
entered frequency (or memory name, if entered) is displayed.
• If no memory channel is entered in the selected BANK, no
memory channels can be selected.
■ Memory bank selection
(Selectable in only the IC-A15)
A total of 200 memory channels in the IC-A15, are divided
into bank
(up to 10 banks are selectable, depending on the setting)
for simple memory grouping.
q Push [MR] to select the memory mode.
w Push [FUNC], and push [BANK](3) to enter the bank se-
lection mode.
e Push [Y]/[Z] or an
appropriate digit key
([0] to [9]) to select
a memory BANK
number, then push
[ENT].
r Push [Y ]/[Z ], or
2 appropriate digit
keys and then [ENT]
to select a memory
channel.
Appears when the
memory mode is selected.
Appears when the bank
selection mode is selected.
Keypad
[FUNC]
[Z]
[ENT]
[B
ANK](3)
[MR]
[Y]
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19

Icom IC-A15 Specifications

General

Brand	Icom
Model	IC-A15
Category	Transceiver
Language	English