Sep. 2009
ADJUSTMENT SOFTWARE INSTALLATION
Microsoft, Windows and Windows Vista are registered
trademarks of Microsoft Corporation in the United States
and/or other countries.
When installing into a Windows Vista
®
, Windows
®
XP or Windows
®
2000 environment, log in as the
administrator.
q
Quit all applications when Windows is running.
w
Insert the CD into the appropriate CD drive.
e
Double-click the “Setup.exe” in the ‘Disk1’ folder of the
‘CS-A210 ADJ’ folder contained in the CD.
r
The “Welcome to the InstallShield Wizard for CS-A210
ADJ” will appear as below. Click [Next>].
Click
t
The “User Information” will appear as below, then type
your name, your company name and the product ID
number with the following manner. Then click [Next >].
• ID number: 298201-(6 digit serial number)
• e.g. the serial number on the CD is 000001, enter “298201-
000001” as the ID number.
Click
Example:
y
The “Choose Destination Location” will appear as below.
Then click [Next>] to install the software to the
destination folder. (e.g. C:\Program Files\Icom\CS-A210
ADJ)
• Click [Browse...] to select another destination folder before
clicking [Next >], if desired.
Click
Click to select another
destination folder.
Confirm
u
After the installation is completed, the “InstallShield
Wizard Complete” will appear as below. Then click
[Finish].
Click
i
Eject the CD.
o
Program group ‘CS-A210 ADJ’ appears in the ‘Icom’
folder in the ‘Programs’ of the start menu, and ‘CS-A210
ADJ’ short cut icon appears on the desktop screen.
• To uninstall the cloning software, select the “Control Panel” in
the start menu, and click the “Add or Remove Programs.”
Then, select the program group ‘CS-A210 ADJ’ and click
[Change/Remove].
To Next Page
Loading...
Need help?
General
