EasyManuals Logo
Home>Icom>Transceiver>IC-A220

Icom IC-A220 Service Manual

Icom IC-A220
233 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #200 background imageLoading...
Page #200 background image
1 - 1
SECTION 1 SPECIFICATIONS
<IC-A210>
<IC-A210E>
D General
Frequency range : 118.000 to 136.975 MHz
Channel spacing : 25 kHz or 8.33 kHz
Frequency stability : ±1 ppm (0˚C to +40˚C)
Operating temperature : –20˚C to +55˚C
Antenna impedance : 50 Ω
Number of memory channels : 10 memory channels
200 group channels
10 history channels
10 GPS channels
Mode : AM (6K00A3E)
Power supply requirement : 13.80 V / 27.50 V DC
(negative ground)
Dimensions : 160(W) 34 (H)271 (D) mm
(projections not incl.)
Weight : approx 1.0 kg
D Transmitter
Mode : A3E
Output power : 6 W (Carrier power)
Spurious emissions : –36 dBm (harmonics)
Microphone impedance : 600 Ω
Modulation limiting : 85% (Max 98%)
Transmitter intermittent : 1 minute (Transmitter ON)
duty cycle 3 minutes (Transmitter OFF)
D Receiver
Receive system : Double conversion
superheterodyne
Intermediate frequencies : 1st 38.85 MHz
2nd 450 kHz
Sensitivity : (AM) Less than 2 µV (pd)
at 6 dB S/N
Selectivity : Channle spacing: 25 kHz
6 dB ±8.5 kHz
• Channel spacing: 8.33 kHz
6 dB ±2.8 kHz
Spurious response rejc. : More than 74 dBµ
Audio output power : 5 W with a 4 Ω load (External
speaker)
60 mW with a 500 Ω load
(Headphone)
All stated specifications are subject to change without notice or
obligation.
D General
Frequency range : 118.000 to 136.975 MHz
161.650 to 163.275 MHz*
Channel spacing : 25 kHz
Frequency stability : ±5 ppm
Operating temperature : –20˚C to +55˚C
–4˚F to +131˚F
Antenna impedance : 50 Ω
Number of memory channels : 10 memory channels
200 group channels
10 history channels
10 GPS channels
10 weather channels*
Mode : AM (6K00A3E)
Power supply requirement : 13.80 V / 27.50 V DC
(negative ground)
Dimensions : 160(W) 34 (H)271 (D) mm
(projections not incl.)
6
5
/
16
(W)1
11
/
32
(H)10
21
/
32
(D)
in
Weight : approx 1.0 kg; 2.2 lb
*U.S.A. version only, receiving only.
D Transmitter
Mode : A3E
Output power : 8 W (Carrier power)
Spurious emissions : –60 dBc
Microphone impedance : 600 Ω
Modulation limiting : 70% (Max 98%)
D Receiver
Receive system : Double conversion
superheterodyne
Intermediate frequencies : 1st 38.85 MHz
2nd 450 kHz
Sensitivity : (AM) Less than 2 µV (pd)
at 6 dB S/N
(FM) Less than 1.4 µV
at 12 dB SINAD*
Selectivity : 6 dB ±3 kHz
60 dB ±22 kHz
Spurious response rejc. : More than 74 dBµ
Audio output power : 5 W with a 4 Ω load (External
speaker)
60 mW with a 500 Ω load
(Headphone)
Measurements made in accordance with RTCA DO-186B for
U.S.A. version. All stated specifications are subject to change
without notice or obligation.

Other manuals for Icom IC-A220

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IC-A220 and is the answer not in the manual?

Icom IC-A220 Specifications

General IconGeneral
BrandIcom
ModelIC-A220
CategoryTransceiver
LanguageEnglish

Related product manuals