4
2
PANEL DESCRIPTION
!1 CLEAR KEY [CLR•DEL] (pp. 8–17)
➥ Push to return to the frequency mode, when
memory channel, WX channel, 121.5 MHz,
squelch level setting or beep tone setting is se-
lected.
➥ Push , then hold down [CLR•DEL] to delete
a recall frequency data.
➥ Push to clear the entered comment of memory
name while programming.
➥ Push to stop the scan function to return to the
frequency mode while the scan function is op-
erating.
!2 ANL KEY [ANL•SCAN] (pp. 9, 16, 17)
➥ Push to turn the ANL function ON or OFF.
➥ Push , then push [ANL•SCAN] to start the
scan function.
!3 EMERGENCY KEY [121.5 MHz] (p. 11)
Push for 2 seconds to select the 121.5 MHz emer-
gency frequency.
!4 DC POWER JACK
Connect the AC adapter or optional cable, to charge the
battery pack or to operate by external power. (see right il-
lustration)
!5 MEMORY MODE KEY [MR•MW] (pp. 12–15)
➥ Push to select the memory channel mode.
➥ Push , then push [MR•MW] to program the
contents into the memory channels.
!6 ENTER KEY [ENT•WX] (pp. 8, 14)
➥ Push to store the numeral input. Enters con-
secutive zero digits. (p. 8)
➥ Push , then push [ENT•WX] to enter the
weather channel selection mode (U.S.A. ver-
sion only). (p. 8)
➥ Push to program the memory name. (p. 14)
NOTE: Some functions may not be available depending on
versions. Ask your authorized dealer for details.
Wall charger
To [DC 11V]
IC-A24/A6
CP-20 (for 11 24 V)
(optional)
To the cigarette
lighter socket
To AC outlet
The shape may
differ depending
on the version.
• DC POWER CONNECTION
R WARNING!
• NEVER modify the CP-20. A modification
could cause a fire or electrocution.
• NEVER cut or fray the CP-20’s power cable
when disconnecting/connecting the CP-20
from/to the cigarette lighter socket.
To Next Page
Loading...
Need help?
General
