5
2
PANEL DESCRIPTION
!7 DIGIT KEYS
➥ Input the specified digit during frequency input, mem-
ory channel selection, etc.
➥ In addition, each key has one or more secondary func-
tions after pushing as follows:
Push
,
then push [0•BANK], and rotate [DIAL]
to select the memory BANK number during mem-
ory mode operation. (p. 12)
Push , then push [1•DVOR] to select the DVOR
display from the CDI display in the NAV band.
(p. 19)*
1
➥ Push , then push [2•TO] to change the
course indicator characteristics to a “TO” flag in
the DVOR display in the NAV band. (p. 19)*
1
➥ Corrects the deviation while using the “TO”
flag.*
1
➥ Push , then push [3•FROM] to change the
course indicator characteristics to a “FROM”
flag in the DVOR display in the NAV band.
(p. 19)*
1
➥ Corrects the deviation while using the “FROM”
flag.*
1
Push , then push [4•CDI] to select the CDI dis-
play from the CDI display in the NAV band.
(p. 19)*
1
Push , then push [5•DUP-W] to set the duplex
frequency in the NAV band for U.S.A. version only.
(p. 24)*
1
Push , then push [6•DUP] to turn the duplex
function ON and OFF in the NAV band for U.S.A.
version only. (p. 24)*
1
Push , then push [7• ] to turn the key lock
function ON and OFF. (p. 11)
Push , then push [8•BEEP] to turn the beep
tone setting mode ON. (p. 11)
• Adjustable level; 0 to 9
Push , then push [9•TAG] to set the displayed
memory or weather channel as a “TAG” channel.
(p. 17)
*
1
These functions are available on the IC-A24 only.
2
3
1
4
5
6
7
9
10
8
12
13
11
14
To Next Page
Loading...
Need help?
General
