8
MEMORY OPERATION
8-6
D Saving a frequency
Save the selected frequency.
1. Set a frequency to save.
2. Push [F], and then push [MW].
• The “Memory Write” screen is displayed.
3. Select and edit the items shown below, if
necessary.
Item Refer to
Name
p. 8-3
Type
p. 8-3
TAG Set
p. 8-4
Position
p. 8-4
Group
p. 8-5
Group Name
p. 8-5
4. Select “<Write>,” and then push [ENT].*
L Push [CLR] to return to the Main screen without
making any changes.
*Aconrmationdialogisdisplayed.
5. Push [MENU] to return to the Main screen.
Saving contents into the Memory channels
You can save contents to the memory channels,
depending on the transceiver’s presettings.
D Saving a Waypoint
(For only the IC-A25N and IC-A25NE)
Save your current position as a Waypoint.
1. Open the “Add Waypoint” screen.
([MENU] > WPT Navigation > Add Waypoint)
• The current position is displayed, if a GPS signal is
received.
2. Select and edit the items shown below, if
necessary.
Item Refer to
Name
p. 8-3
Type
p. 8-3
Position
p. 8-4
Group
p. 8-5
Group Name
p. 8-5
3. Select “<Write>,” and then push [ENT].*
*Aconrmationdialogisdisplayed.
4. Push [MENU] to return to the Main screen.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
