11
MENU ITEMS
11-2
Using the Menu screen
You can use the Menu screen to set infrequently
changed values or function settings.
The Menu screen is constructed in a tree structure.
You can go to the next tree level with [RIGHT] or
[ENT], go back a level with [LEFT] or [CLR].
To select an item, rotate [DIAL] or push [UP] or
[DOWN].
Search Near ST
([MENU] > Search Near ST)
Search for near stations.
L The function works only when the transceiver’s GPS
receiver is receiving valid GPS signals.
(For only the IC-A25N and IC-A25NE)
WPT Navigation
D <WPT NAV OFF>
([MENU] > WPT Navigation > <WPT NAV OFF>)
Cancel the Waypoint Navigation.
L Not displayed, when the Waypoint Navigation function is
not used.
D <WPT NAV Disp>
([MENU] > WPT Navigation > <WPT NAV Disp>)
Display the Waypoint Navigation screen.
L Not displayed, when the Waypoint Navigation function is
not used.
D Direct-To WPT
([MENU] > WPT Navigation > Direct-To WPT)
Select a waypoint to use as a destination.(p. 6-2)
Select Memory
Select a waypoint from memory.
Flight Plan
Select a waypoint from a Flight Plan.
Near Waypoint
Select a waypoint near your current location.
L The function works only when the transceiver’s GPS
receiver is receiving valid GPS signals.
Manual Entry
Set a waypoint manually, by entering latitude,
longitude, and magnetic variation.
History
Select a waypoint from history.
(For only the IC-A25N and IC-A25NE)
NOTE: The menu items contained in the transceiver
may be different, depending on the transceiver’s
version or presettings. Ask your dealer for details.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
