Icom IC-F1020 User Manual

3
CONNECTION AND INSTALLATION
11
■ Mounting
■ Separation
q Separate the front panel from the transceiver main unit
using an allen-wrench (1/32 in).
w Connect the optional separation cable to the both front and
main unit attachments (fig. 1 and 2).
• Remove the rear plate of the attachment.
• Use the supplied screw to connect a cable lug.
• For the main unit attachment, attach to the main unit using sup-
plied screws, in advance.
e Attach the front panel and attachment with the removed 3
allen socket bolts (fig. 3)
Fig. 1
Fig. 3
Fig. 2
Separation cable
OPC-607, OPC-608,
OPC-609 or OPC-726
Attachment
(for front panel)
Attachment
(for main unit)
Rear plate
Supplied screws
with the RMK-1
Flat washer
Spring washer
When using
self-tapping screws
•Separation (using RMK-1)

Icom IC-F1020 Specifications

General

Brand	Icom
Model	IC-F1020
Category	Radio
Language	English