21
3
BIIS OPERATION
3
ï General
The short data message, SDM, can be sent to an individual
station or group stations. Also, 8 SDM memory channels are
available and the messages can be edited via PC program-
ming.
ï Transmitting an SDM
q While in the standby condition, push [P1] (Digital), then
push [Up] or [Down] or rotate [DIAL] to select the desired
station/group code.
w Push [P1] (Digital) again, then push [Up] or [Down] or rotate
[DIAL] to select the desired SDM.
Or, you can select the desired SDM using [Status Up]/ [Sta
-
tus Down] key directly.
M E S S A G E 1
S D M 1
SDM is displayed.
Appears
e Push [P0] (Call) or [PTT]* to transmit the SDM to the se-
lected station/group.
*PTT call can be made only when PTT call capability is permitted.
• 2 beeps will sound and the transceiver returns to the standby
condition automatically when the transmission is successful.
n Transmitting an SDM (Short Data Message)
To Next Page
Loading...
Need help?
General
