22
4
BIIS OPERATION
Received message selection
D
The transceiver memorizes the received message in the
memory. Up to 6 messages for status and SDM, or 95 charac-
ter SDM’s can be memorized. The oldest message is erased
when the 7th message is received. However, once the trans-
ceiver is powered OFF, all messages are cleared.
Push and hold [Digital Button] for 1 sec. q
• Displays queue memory.
Push [Digital Button] momentarily. w
• Displays message memory.
When a message is available
TXCECALL
TXC
BIFN
MESSAGE
–
MSG
!
–
When no message is available
TXCECALL
TXC
BIFN
MESSAGE
–NO
MSG–
Push [CH Up] or [CH Down] to select the desired mes- e
sage.
• When selecting the SDM that includes more than 12 characters,
the message scrolls automatically when the automatic scroll
function is activated.
• Push [Status Up]/[Status Down] to scroll the message manu-
ally.
Push and hold [Digital Button] for 1 sec. again to return to r
the standby condition.
• When no operation is performed for 30 sec., the transceiver re-
turns to the standby condition automatically.
To Next Page
Loading...
Need help?
General
