5
SET MODE
12
■ SET mode items
D Beep tone function “bP”
You can select silent operation by turning the beep tones
OFF, or you can have 2 types of confirmation beeps sound
at the push of a key. When “ON” is selected, a fixed beep
(Pi) sounds, and when “US” is selected, the preset beeps
(e.g. do, re, mi) sound.
• Beep tone synchronizes with the volume level.
• The beeps sound during call channel programming even if this
function is turned OFF.
D Monitor switch action “Sq”
The monitor switch action cuts off the squelch function tem-
porarily. This switch action contains PUSH (Pu) or HOLD
(Ho) settings as shown below.
• PU (PUSH): After pushing [SQL•MONI] for 1 sec., the squelch
opens and emits audio. The squelch is held open
while continuously pushing and holding [SQL•MONI].
(default)
• HO (HOLD): After pushing [SQL•MONI] for 1 sec., the squelch
opens and emits audio even if [SQL•MONI] is re-
leased. To close the squelch, push any switch.
D Backlit function “bL”
This function is convenient for nighttime operation. The back-
lit brightness can be adjusted from OFF, 1 (dark)–3 (bright);
3 (default). Select 1–3 to turn this function ON.
•
The automatic backlit turns the backlit ON when any switch except
for [PTT] is pushed.
• The backlit is automatically turned OFF after 5 sec. of inactivity.
D LCD contrast selection “LC”
The contrast of the LCD can be adjusted from 4 levels.
•
1 (bright)–4 (dark); 3 (default)
Push
Beep tone ON (default)
Beep tone OFF
Push
PUSH setting (default) HOLD setting
Push
Backlighting ON
(default)
Backlighting OFF
Push
Middle contrast
(default)
Low contrast
To Next Page
Loading...
Need help?
General
Weight and Dimensions
