× Weather channels
There are 10 weather channels. They are used for monitoring
weather channels from the NOAA (National Oceanographic
and Atmospheric Administration) broadcasts.
The IC-M1V can detect a weather alert tone on the selected
weather channel while receiving in another channels, during
standby on a regular channel, or while scanning. See the
“SET mode items” on p. 17.
➥Push [CH/WX] once or twice to select the weather channel
group.
➥Push [Y]/[Z] to select weather channel.
➥Push [CH/WX] to return to the condition before selecting
weather channel group.
× U.S.A., International and Canadian channels
There are 57 International, 61 U.S.A. and 57 Canadian chan-
nels. These channel groups may be specified for the operat-
ing area.
q Push [CH/WX] to select a regular channel.
•If a weather channel appears, push [CH/WX] again.
w Push [Y]/[Z] to select a channel.
•“DUP” appears for duplex channels.
e To change the channel group, push [CH/WX•U/I/C] for
2 sec.
•U.S.A., International and Canadian channels can be selected in
sequence.
To Next Page
Loading...
Need help?
General
