Icom IC-M1V User Manual

18
8
SET MODE
× Auto scan function
“AUTO SCAN”
While in standby, this function automat-
ically starts the desired scan (normal or
priority scan) 30 sec. after operation.
•The comment indicator indicates “SCAN”
while scanning.
The transceiver has a power save
function, but it does not activate
when the auto scan function is in
use.
× Automatic backlighting
“BACKLIGHT”
This function is convenient for nighttime
operation. The automatic backlighting
turns the backlighting ON when pushing
any key except for [PTT].
•The backlighting automatically turns OFF
5 sec. after operation.
•Push [MONI] to turn the backlighting ON
without changing the operating condition.
• The backlight comes ON when entering
SET mode, regardless of this setting.
× Power save function
“POWER SAVE”
The power save function reduces cur-
rent drain by deactivating the receiver
circuit for fixed intervals.
The power save function does not
activate when the auto scan function
is in use.
Push
Power save
ON (default)
Power save
OFF
Push
Scrolls the channel
comment, “ ”.
Push
Auto scan
ON
Auto scan
OFF (default)
Push
Scrolls the channel
comment, “ ”.
Push
Automatic
backlighting
ON (default)
Automatic
backlighting
OFF
Push
Scrolls the channel
comment, “ ”.

Icom IC-M1V Specifications

General

Brand	Icom
Model	IC-M1V
Category	Transceiver
Language	English