EasyManuals Logo
Home>Icom>Transceiver>IC-M1V

Icom IC-M1V User Manual

Icom IC-M1V
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
y CHANNEL UP/DOWN SWITCHES [
YY
]/[
ZZ
]
Push either switch to change the operating channel.
(pgs. 7–9)
Checks tag channels or changes scanning direction dur-
ing scan. (p. 13)
Push either switch to change the setting during set
mode. (p. 16)
u CHANNEL 16 SWITCH [16•9]
Selects channel 16 when pushed. (p. 7)
Selects the call channel when pushed for 2 sec. (p. 7)
Enters call channel write mode when the call channel is
selected, and this switch is pushed for 5 sec. (p. 11)
i INTERNAL MICROPHONE (p. 9)
o SPEAKER-MICROPHONE CONNECTOR [SP MIC]
Connects the optional speaker-microphone. (p. 22)
!0 ANTENNA CONNECTOR
Connects the supplied antenna. (p. 6)
!1 CHANNEL/WEATHER CHANNEL SWITCH
[CH/WX•U/I/C]
Selects and changes the regular channels and weather
channel when pushed momentarily. (p. 8)
Selects one of 3 regular channels in sequence when
pushed for 2 sec. (p. 8)
U.S.A., International and Canadian channels are avail-
able for regular channels.
!2 DUALWATCH/TRI-WATCH SWITCH [DW•TRI]
Starts dualwatch when pushed momentarily. (p. 14)
Starts tri-watch when pushed for 2 sec. (p. 14)
Stops dualwatch/tri-watch when either is activated.
(p. 14)
Enters comment writing condition when pushed while
pushing and holding [MONI]. (p. 15)
!3 SCAN SWITCH [SCAN•TAG]
Starts and stops normal or priority scan when tag chan-
nels are programmed. (p. 13)
Sets the displayed channel as a tag (scanned) channel
when pushed for 2 sec. (p. 13)
While turning power ON, clears all tag channels in the
selected regular channel group when pushed. (p. 13)
Activates an optional voice scrambler function while
pushing [MONI]. (p. 10)
!4 TRANSMIT POWER/LOCK SWITCH [H/L•LOCK]
Changes high and low power (1 W) when pushed. (p. 9)
Some channels are set to low power only.
While pushing [MONI], push this key to select extra low
power (500 mW). (p. 9)
Changes the lock function ON and OFF when pushed
for 2 sec. (p. 10)
!56 INTERNAL SPEAKER
PANEL DESCRIPTION
3
2

Other manuals for Icom IC-M1V

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Icom IC-M1V and is the answer not in the manual?

Icom IC-M1V Specifications

General IconGeneral
BrandIcom
ModelIC-M1V
CategoryTransceiver
LanguageEnglish

Related product manuals